Windows 10 Has got a new update which has very exciting features and aesthetics but it has also unexpected errors which could have been avoided. One of the major error is the unexpected store exception error which forces you to restart your PC’s.
This unexpected store exception error is very irritating since Windows 10 have been updated. This error comes with the blue screen of death. Mostly this errors occur due to the antivirus program install in the PCs.
In this article, we will be discussing about uninstalling the antivirus software to stop this Bsod from irritating us. The bug details clearly shows that this error occurs due to the antivirus software. In the book details in the section the traces generated by the operating system shows it.
How to Fix Unexpected Store Exceotion Error in Windows 10
In that section, if you are able to find out the drives that are used by antivirus protection programs you can easily find out the errors. Even though you don’t want to remove the antivirus software from your program this article contains another options for you to remove this error from your PC. So let’s see solutions to remove the error that is unexpected store exception error in Windows 10.
Solution 1: Uninstall Antivirus Program
Windows 10 has an inbuilt Microsoft defender which is ah best antivirus application. So uninstalling any antivirus program won’t effect your PC’s will be protected. McAfee has been reported as culprit.
Follow the below steps to uninstall the Antivirus Program –
Step 1: Click on the “Windows key +X” to display the pop up menu.
Step 2: Click on the “ Control Panel” option in the drop down list.
Step 3: The control panel consists of the section named “programs” select it.
Step 4: This list will display all the programmes installed in your PC’s. Select the Antivirus software and all the versions of it then press right click and click on the uninstall option from the drop-down list.
Step 5: You will get a popup window asking you if you really want to uninstall the program, say yes.
Follow all these steps to complete the uninstallation. Then restart your PC. You will now face less errors if the above steps are followed. If the problems continue then we have two more solutions we are going to discuss further in this article.
Solution 2: Check Hard Disk Health
Some users have faced this errors after finding errors in the Hard Disk Health. Their Pc’s contained important files in the bad sector of the hard disk which caused this error. Also, some users found out a dying drive to be the cause for it. If the above solution didn’t fix your error in the PC then you must check for the hard drive health to solve the issue. We have to use a third party hard disk health diagnostic tool to solve the problem. Perform the given steps –
Step 1: For checking the hard disk health we will be using the Crystal Disk info app.
Steo 2: This app is executable you must follow the instructions on the screen to install it.
Once the app is installed you can launch it and the main window will give the Hard Disk Health status. If the Hard Disk Health is a normal one it displays “Good” report and when it displays “bad” then there is some problem with your hard disk in such cases it is recommended as to replace your hard disk. If however the error is occurring still the app shows good status then we have one more method to recommend.
Solution 3: Check Driver Issues
This method is useful for Lenovo PC. If the error occurs again and again then you should perform the following steps to solve this issue –
Step 1: Disable the automated installation of drivers. Type “gpedit.msc” in search of the start menu. For installing the global policy editor if not installed then you should follow the instructions below to install it:
Step 2: Expand the “Computer Configuration” in the left side of the window.
Step 3: Click on the “Administrative Template” then on “ System” and then click on “Device Installation”
Step 4: Then double click on “ Prevent installation of devices not described by other policy settings” on the right side of the window.
Step 5: Then click on “enable” and click “Ok”.
Step 6: Restart the computer.
Step 7: Press “Windows key+ X” then select “Device Manager” in the start menu.
Step 8: In the Device Manager windows move to “Sound video and game controllers” then press on “ Conexant Smart Audio” or “ IDT High definition Audio” proceeding uninstall from the list and then check if in the checkbox the “Delete the driver software for the device” is checked.
Step 9: Then click on “Windows key+ X”& click on “Programs and Features” from the drop-down list uninstall all related to Dolby and IDT.
Step 10: Now reboot your PC.
After rebooting you need to download and install the driver for Dolby. You won’t be facing errors after reinstalling the latest driver.
Solution 4: Turning off Fast Start-up
Windows 10’s fast start-up works In a similar fashion as that of the previous versions of sleep modes. It is a combination of cold shutdown and hibernates features. Computer windows close all the apps running in the background. While the system session is running and kernel loads up. Notification is sent to device drivers for preparation of hibernation saving the current state to hibernation and turning off the computer. By this method when you restart your PC there is no need to reload the kernel system state or the drivers. The loaded image is refreshed from the hibernation file in your am directing to the start-up screen.
This method saves a lot of time. But the negative side is that it doesn’t load the required drivers properly every time you restart. As the drivers are not reloaded already by restarting they won’t open. This may cause problems while operating.
Step 1: Click on Windows+R to launch the Run application. Then press the control panel in the dialog box and click on enter. This will result in launching a computer control panel.
Step 2: In the control panel press power options.
Step 3: In the power options press “Choose what the power buttons do” This option is present on the left side of the screen.
Step 4: An option requiring the administrative privileges called “Change settings that are currently unavailable” Is present click on it.
Step 5: At the bottom of the screen uncheck the box saying “Turn on fast start-up”. Save the changes and exit.
Step 6: Restart the computer and check if the problem is fixed.
Solution 5: Updating your Display Drivers
In this method, we will restart your computer in safe mode and delete the install drivers for your display card. After restarting the disk fault display drivers would be installed automatically after detection of display hardware.
Step 1: You can follow the steps to boot your computer in safe mode which are present in this article.
Step 2: After booting in the safe mode Right-click on the windows key and then press device manager from the drop-down list.
There is one more way to launch the device manager by pressing windows plus hour which will launch run application and then type “devmgmt.msc”.
Step 3: In the device manager expand display adapter section after that right-click on the display hardware. Then click on uninstall device. There will be a pop up confirming your actions press okay and proceed further.
Step 4: Restart your computer. Press windows plus to launch your start menu in the search bar. Type Windows Update in the dialog box and click the first search result.
Step 5: In the update settings, click on the option which says updates “check for updates”. The updates will automatically check if available and will be installed. You may need to restart your computer
Step 6: After updating, check if the issue is resolved.
The fee drivers are frequently updated to deliver the best for hardware devices. Even if the latest driver doesn’t solve the issues due to the errors you can also install your older driver fire hardware. You can manually install the driver from the list by the manufacturers. For manually installing the drivers follow the below steps.
Step 1: In the above solution steps are given to open the device manager follow it and then right click on the driver unselect update driver from the drop down list.
Step 2: A pop up window will appear which will be asking you options of manually or automatically updating the drivers. Click on “browse my computer for driver software”.
Step 3: In the Downloaded drivers you can browse through the folders. You can select the required drivers under windows will install it and you can restart and check if the problem or error in your PC is the result or not.
You must also check the devices connected to your PC by the device manager and update the drivers one by one. Sometimes this error occurs due to the other devices connected to your PC.
Solution 6: Running System File Checker
System file checker is a feature in Microsoft Windows with the help of which uses can scan there PC’s for corrupt files. This is an old feature in Microsoft Windows since Windows 98. This helps in finding out whether the error is Occurring due to the corrupted files in the windows.
Step 1: For launching the run application press windows+R. In the dialog box type “taskmgr” and press enter. This will launch computers task manager.
Step 2: At the top left corner of the screen click on the File options and select “ Run the new task” from the drop-down list.
Step 3: Type “Powershell” in the dialogue box and tick mark on the “ create this task with administrative privileges”.
Step 4: In the Windows Powershell type “sfc/scannow” and press enter button on the keyboard. This may take more time due to scanning of computer.
Step 5: If you come across an error where the Windows state that it has found some error but is unable to fix it then you should type “DISM/ Online/Clean-up/ RestoreHealth” in the Powershell. This process may take more time as it depends upon your internet connectivity.
Restart your PC and check if the computer started working properly. If so then the error is fixed by this method.
Solution 7: Turning off sleep mode
This method fixed the majority of the errors which is disabling sleep mode. This error might be related to the computer sleeping or due to the saving of the predefined data due to the first startup. We can disable the sleep mode completely and then check if the issues are errors are resolved. If it doesn’t work you can revert the changes.
Step 1: Firstly right click on the battery icon off the right bottom corner of your windows and click “power options”.
Step 2: If your computer doesn’t have this option then press Windows + S and then type “ choose a power plan”. Click on the more relevant option.
Step 3: On the screen click on the option “Put the computer to sleep”. Set the option to “Never” in the two conditions i.e on battery and plugged in. Click on “Save changes” and exit.
Step 4: Now reboot your PC and check if the error is fixed.
Solution 8: Reconnecting your Hard Drive (only for towers)
One method ease to connect your hard drive again and check if the error is fixed. If the problem is with the hard drive the issue is resolved by this method. You have to turn off your PC, unplug the power, then take off the lead very carefully and disconnect the black and white wires going to a motherboard from your hard drive. Wait for some time for some minutes and then plug them back in. Then reboot your PC and then check if the error is resolved.
After reinstalling the windows the problem continues it is recommended to check your hard drive. There are chances that the problem lies within the hard drive and the error occurs again even though after installing a fresh copy of windows on your computer.
Conclusion
All these methods will help you to solve the error which is unexpected store exception error in Windows 10. This article contains 8 solutions to this error. Surely anyone of this will solve your problem.